Sportive Paint is a single component PU/acrylate line marking paint, designed for use either beneath or between coats of Sportive Finish. The paint can also be used for decorative purposes.

Sportive Paint is a single component PU/acrylate line marking paint, designed for use either beneath or between coats of Sportive Finish. The paint can also be used for decorative purposes.

Non-toxic, quick drying, low odour, completely clear and non-yellowing. Resistant to water, alcohol, white spirit and similar solvents. Very hard wearing. Touch dry in 20 minutes and re-coatable in 2 hours. Can be applied to wood, cork, MDF, concrete and unsealed terracota and quarry tiles. Available in Gloss and Satin finish. Clean brushes in water.

A two-part cols cure lacquer with excellent adhesion and durability. Almost colorless and will not craze or yellow on aging. Resistant to scratching, abrasion, most solvents, weak acids and alkalis. Can be applied to wood, cork, chipboard, MDF, laminates, slate and stone. Re-coatable after 1-1.5hrs, floor can be used 2 hrs after light coat has been applied. Available in Gloss and Satin finish.

A heavy-bodied, pale coloured, solvent based polyurethane varnish with tough and durable finish. Resistant to water, alcohol, white spirit and similar solvents. Drying time is 4-6 hours. Can be applied to wood, cork, MDF and old concrete floors. Can be applied to already coated flooring without sanding as long as the surface is clean and free from wax. Available in Gloss and Satin finish.

A heavy-bodied, pale coloured, solvent based polyurethane varnish with tough and durable finish. Resistant to water, alcohol, white spirit and similar solvents. Drying time is 4-6 hours. Can be applied to wood, cork, MDF and old concrete floors. Can be applied to already coated flooring without sanding as long as the surface is clean and free from wax. Available in Gloss and Satin finish.

Bona Mega (in Silk finish) is a single component, waterbased, 100% polyurethane lacquer for the surface treatment of timber floors in commercial and domestic areas subject to heavy wear. As crosslinking is achieved using oxygen in the air, Bona Mega has the performance of a two-component finish without requiring a separate catalyst.

It has all the advantages of a waterbased system, but still gives a deep, rich colouration similar to a solvent based finish. Bona Mega is available in ExtraMatt, Matt, SilkMatt & Gloss sheens.

• VOC 2010 compliant
• Easy to use, only one component
• Oxygen crosslinked
• Deep, rich solvent based appearance
• High resistance to wear, scuff marks, chemicals and scratches
• Mega Gloss meets DIN Norm 18032 and BS 7044:1990 for slip resistance
• Bona Mega Silkmatt and BOna Mega Matt meets BS 7044:1990 for slip resistance
• All versions meet O Norm C 2354 Category C (very heavy wear)

Application:

• On bare wood - 1 Coat x Primer, followewd by 2-3 coats of Bona Mega varnish
• Overcoating previously varnished floors should be carried out with Crosslinker.

Bona Mega (in Gloss sheen) is a single component, waterbased, 100% polyurethane lacquer for the surface treatment of timber floors in commercial and domestic areas subject to heavy wear. As crosslinking is achieved using oxygen in the air, Bona Mega has the performance of a two-component finish without requiring a separate catalyst.

It has all the advantages of a waterbased system, but still gives a deep, rich colouration similar to a solvent based finish. Bona Mega is available in ExtraMatt, Matt, SilkMatt & Gloss sheens.

• VOC 2010 compliant
• Easy to use, only one component
• Oxygen crosslinked
• Deep, rich solvent based appearance
• High resistance to wear, scuff marks, chemicals and scratches
• Mega Gloss meets DIN Norm 18032 and BS 7044:1990 for slip resistance
• Bona Mega Silkmatt and BOna Mega Matt meets BS 7044:1990 for slip resistance
• All versions meet O Norm C 2354 Category C (very heavy wear)

Application:

• On bare wood - 1 Coat x Primer, followewd by 2-3 coats of Bona Mega varnish
• Overcoating previously varnished floors should be carried out with Crosslinker.

A two-part cols cure lacquer with excellent adhesion and durability. Almost colorless and will not craze or yellow on aging. Resistant to scratching, abrasion, most solvents, weak acids and alkalis. Can be applied to wood, cork, chipboard, MDF, laminates, slate and stone. Re-coatable after 1-1.5hrs, floor can be used 2 hrs after light coat has been applied. Available in Gloss and Satin finish.

Junckers Strong, Matt Finish is a waterbased, low odour polyurethane lacquer providing a hard-wearing surface on wooden floors.
Junckers Strong is used for application on untreated and previously finished timber, suitable for lacquering of indoor woodworks as well.